All registrations are checked by a live human being to prevent spam and may take a few minutes to a day or two be approved. We thank you in advance for your patience and look forward to having you be part of our community!
Does anyone have a source for the black cap clips? Melco has them but they are $10 EACH! You know the one's I'm talking about...The black clips to hold the back of the cap down.
If you mean the black 'wedge' clips that you find on papers and stuff...go right to Staples and buy a TUB full of them for less than $10.00
That's what we use for extra grip on the speedframe, holding backing in place on some things, and yup, paper sometimes!
OH, the difference might be the 'hat clips' have the 'wings' (levers) bent down to stay out of the way on the hoop...easy enough to do with a pair of pliers. Staples carries them in several sizes-just bring one with you to get the right size, but grab a couple of the bigger ones-always handy for that extra 'grab' on a large hoop or to hold something out of the way, like hoodie strings, tote bag straps, whatever you forgot to move out of the way and sewed right through...duh, yeah, we've all done it.
Wow fast response signman! I thought about using "regular" black clips from Office Depot but I was concerned that since the handles aren't angled back like the one's that came with the cap frame that it may catch something and ruin the cap.
I wonder if I can buy the Office Depot ones and just switch out the handles. Has anyone tried that? It would be worth a try since I can get them at the store for only about .10 cents each compared to $10 each at Melco...Thoughts?
I can't believe that I didn't think about just using pliers to bending the store bought ones back!...I just tried it and it works perfectly! Problem solved in twenty minutes. You got to love this forum. Thanks signman! You just saved me about $50 bucks!
The paper clamps you folks are talking about are Ideal Clamps/Clips. You dont have to bend the wires if you don't want to.
If you squeeze the wire together they lift right out of the clamp, and go back in just as easy.
Good to know. I just tried that too and they come out very easily. I can't believe that i almost paid ten dollars each for these! A big "Thank You" to Signman and Jerome!
If you don't bend the wires down, you will find out quickly why Melco DOES bend them down!
Keeps that loop of steel out of the way of the needlebar-only takes the tiniest 'grab' and that clamp pops right off and you have your hat or whatever sliding around. Then you've ruined the item or have to spend time picking out all the stitches to start over.
On hat hoops especially you don't want anything sticking up in the way!
Signman
Did you even read my post.
It refered to the fact you can easily remove the Wire completly I really think that would lead to them being OUT OF THE WAY.
Unless of course one was to store then on the grabber bar....lol
Without the wires you can't open the clips to install them...having to put on or remove the wires each time would really add to the time needed for hooping-speed = $$ profit for less time spent.
I do hundreds of hats a month and most of the time I don't even use the clips. The only time I use the clips are when the cap is unstructured or I am sewing on the side of the cap. So if you are looking to save time, don't use the clips when you don't need them.
Comment