It's been some time since I've had to use the cap attachment (XT Extended WACF). When I choose the hoop (XT Extended WACF)the design origin (red cross lines) are no longer in the center of the hoop/cap outline if that makes any sense. What happened and how do I change it to be centered. It is centered in all the other hoop selections except when I choose the XT Extended WACF. HELP!!
Announcement
Collapse
No announcement yet.
Amaya OS design origin (red cross lines)
Collapse
X
-
If you are using the laser pointer to bring the cap to center remember it will be off because of the roundness of the cap. I use the needles to line up the center of the caps. I usually dont look at where the lines are on the screen as long as my needle is in the center at the starting point I am good.
Hope that makes sense!Tina K.<br />Embroidery Gals<br /> <a href=\"http://www.embroiderygals.com\" target=\"_blank\">http://www.embroiderygals.com</a> <br /> <a href=\"http://www.bridalgiftspersonalized.com\" target=\"_blank\">http://www.bridalgiftspersonalized.com</a><br /><a href=\"http://www.facebook.com/cruisetoembroiderysuccess\" target=\"_blank\">http://www.facebook.com/cruisetoembroiderysuccess</a>
-
I've attached the XT Extended WACF hoop to my Amaya XT. I go to OS and select the XT Extended WACF from the hoop selection. I click center hoop, the machine moves and centers the hoop like normal. Looking at the OS screen, the red cross hairs are not centered in the hoop outline. Just want to know why it's not centered when it used to be in the past. All other hoop selected, the cross hairs are centered.
Comment
Comment