Bobbin Thread Break Problem :||

[Freeman78_italy]

Hi there again!
After successfully fixing the hook timing etc. by a good tech over here i had this problem...
The trimmer wasn't trimming correctly, sometimes it did sometimes it didn't.I decided to change the trimmer.I did it.Now the following happens :|||
After cutting it ALWAYS gives bobbin error and if I take it out it's short cut and I have to manually fix and stitching restart correctly till the next cut...it's getting painful :|||||
I solved a thread break problem with the tech (he properly aligned and configured the hook) and I had a bad thread cone.
Now I have this bobbin thing :|
I'm a bit depressed about it, especially because the tech are always involved and you are never able to fix using a normal manual.I understand it's a serious business but it's also frustrating to call the tech for everything :|||
Any idea?
Did i make something bad when changing the trimming knife?
Is there any instructional video for maintenance etc. that i can use?

[Redina]

On your Settings menu in OS, there is a Tail Length setting, choices being short, medium and long. Have you tried to change it to a long or medium setting? Another possibility is to reduce the number of trims and cut them later. Not a solution but at least you could get some work done.

I changed the trim knife using the direction on the computer and have had no problems, seemed pretty straight forward. I am surprised no techs have weighed in on this one.

[Steve I]

Freeman,

If you go into tools/maintainance/steppers there are a couple of things you can do there. Check what trimmer type you are set for (if your machine is over a year old most likely it should be set at 0). You can also click on the detect trimmer button sometimes that works. Also go into the thread feed tab and see what type of trim you are set for (normal or metallic) Try that and see if it helps.

Steve I.
Trinity Embroidery

[Freeman78_italy]

Hi There,
i had to call the tech...nothing seems to help into this (
I'll be off for the weekend and monday maybe i can have that troubleshooted...what piss me so much is that on the CD i have there is NO instruction on how to adjust the crochet or how to change the trimmer.I have 2005 cd, and manual, but it's for amaya, not for XT and i'm lost.
Any help into getting some manual updated with procedures?
tx for trying to help, i appreciate it!