So I was running my machine all day and then it just stopped. The laser light was stuck on so I turned the machine off and back on but the machine won't turn back on. It won't even make a noise, no light comes on, won't show in OS
Announcement
Collapse
No announcement yet.
Machine not turning on
Collapse
X
-
Check your emergency stop button; check all connections to the machine. Is there a light showing on your keypad? Is your mother board coming on?
Here are some links that might provide some info:
-
You must be careful in these types of problems. The PCB controller is $1200. You don't want to mis diagnose that when the problem may be a blown fuse or power supply.
As stated before the light on the PCB are indicators for power input and the PCB operational status. Some are solid and some blink.
The arbitrary illumination of the lases makes me think board but that is just a guess. Your next action should be based on your electrical knowledge.
Inobu
Comment
Comment