Thread Breaks On All Needles

[Wishes]

Dear Vegas,
I would try a large needle maybe a 10 or 11 sharp and see if the density is too dense. May a thicker underlay and less topstitching.

[The Embroidery Authority - OLD]

Margaret,
They are sewing a design that has been created by Melco. We can consider this particular design to be digitized correctly. And also digitized for particular test reasons.
Ed

[The Embroidery Authority - OLD]

Vegas,
If you are sewing .35" lettering, make sure you are using very little underlay - like maybe a center walk and also make sure you are widening your column's width at least about 120%. Turn off "short stitches" if they are turned on and do not have your density less than 4.3 pts.
Hope this helps.
Ed