HATS

[thepreppyone]

The clamps on my hat driver have come loose so everytime I put a cap on 2 of the 3 clamps unsnap. Is there anyway to tighten these up?

[Rod or Sharon]

Preppyone,

Yes....look at the toggle clamps closly....you will see that there are two nuts on the screw. loosen one of these nuts so that you can lengthen the portion of the screw that sticks out with the pad on it...then tighten the nuts back up.....not a very good description/explanation, but that is how it is done...

Rod Springer
Amaya Tech & Trainer

[thepreppyone]

Thanks so much! I will go try that....