LED bar replacement

[Twilock]

If you can solder and have a solder sucker, you can get the replacement L.E.D. bulbs on Ebay. I got 100 @ $4.80 with free shipping. These are much brighter than the old ones. That's about .05 cents a bulb with a little repair time.

100pcs-5mm-WaterClear-Round-Top-2pin-white-Super-bright-LED-Light-30000MCD-0176

Price:
US $4.80

LED lights.jpg

Updated Dec. 2020 500 pcs for $10.84 plus $1.20 shipping

https://www.ebay.com/itm/500pcs-New-2pin-5MM-LED-Diodes-Water-Clear-White-Light-Round-Top-Ultra-Bright/201262817294?hash=item2edc32e00e:g:rUsAAOSwy4hUUIq6

[Twilock]

100pcs-5mm-WaterClear-Round-Top-2pin-white-Super-bright-LED-Light-30000MCD-0176

Copy the top line and go to ebay and paste. The important part is it must be 5mm at the top (that's width) not height. The last number should work 30000mcd-0176.

Shipping takes a week, comes form China.

I had one board where all the lights went out, replaced them and they were so bright I went ahead and replaced all the lights on three more boards. Much better,,,make sure after you solder new lights in to use the one screw opposite the plug to guide to the right position before plugging back in. The first time I did not do this and my plug shorted out on the frame and blew six more lights before I put a guide screw in. Had to replace the six again...but they all worked once I plugged the red/white wires in. The long wire is your positive which is marked on the board. Just look at polarity on existing bulbs before taking them out.

Good Luck.

[Twilock]

NEW super bright LED lights

These LED lights work great and Cheap. Don't spend the 50 bucks for a new part when you can easily replace these lights, just need a soldering iron. These are much brighter than the originals. Around 2 bucks for a qty of 100.

Email me if you have any questions.
[email protected]

http://www.ebay.com/itm/151947317085...%3AMEBIDX%3AIT

led.jpg

[Twilock]

Replacement LED lights

These NEW lights work great.

http://www.ebay.com/itm/151947317085...%3AMEBIDX%3AIT