bobbin thread trimming too short

[samme]

Lately my machine has been saying I have a thread break when it actually has not picked up the bobbin thread because it is too short. I have it set it on normal trim. It doesn't do it all the time. Is my bobbin case wearing out? Thanks for your feedback!!

[EEAmayaTech]

START with making sure u dont have a bent trimmer cable. On back of aAmaya rmove the large lower metal cover. U will see 2 metal push rods, make sure they r not bent. If so, thats ur problem. If not then u just ned to adjust the trimmer assy.

[gcannon]

I think a couple of things you could check before dismantling the machine would be to make sure the bobbin case is clean & the tension is correct; if that doesn't correct the problem, try setting the trim lenght to "long". Another thing- make sure the pigtail isn't bent; if you have another machine, switch them out, if not, do you keep a spare(s) on hand?

[YDCustom]

We tend to have this problem when our bobbin case, trimmer and/or rotary hook area start to get full of lint. It usually clears up if I give everything a good cleaning and oiling.

[samme]

Ok I will try that! Rod just replaced the push rod a couple months ago because it was bent so...........I ordered another bobbin case and it just arrived today so I'll see if all the above help!! I'll let you know how it goes!!Thanks again for the help!