V-Neck medical Scrub top

[levelbest]

For some reason - the system ate this post so I am reposting. This message was posted by Maggie43a:

I am sewing a design on a V-Neck Medical Scrub Top no pocket. Can someone PLEASE help me with the placement of the design?? The design fits in a 15cm hoop and is 4" wide by 2.5" high.

Thank You for any help you can give me!!!

[levelbest]

Ron Replied:

> From the center of the vneck mark over around 3.5" to 4"
> then from the top shoulder seam mark down around 7" to 8" for women and 8"
> to 9" for men.
> where the two marks cross, use that as your design center.
>
> That is the measurements that we use.
>
> Good luck
> Ron

[levelbest]

Sharon Replied:

The thing we were missing from her post was the size of scrub she was going
to embroidery. We always teach to use as the center vertically---where your
neck and shoulder meet and down horizontally about center of the arm. If
still in question, find someone to put the garment on and mark where the
center should be with a small piece of masking tape (just remove it before
sewing!). Some of the interesting garments are wrap bathrobes or chef's
coats.

Sharon Springer