Stitching toddler and infant ball caps

[Sparklesbyshell]

What hoop? Any suggestions and has anyone done them successfully?

[Aaron]

You have a 10-15 foot pole? Thats still probably not long enough to touch them [img]smile.gif[/img]

Seriously, I use the CCF cap frame. The caps are so small you can't completely hoop them on the hoop guage. I put backing on and get it on the frame about half way then take it off the frame and clamp and pull it around til it looks straight. I only do 1 or 2 here and there because they take a while to get hooped. Because of the small size I size the design way down to around 2.5" wide by 1.25" tall. If you go much bigger then it will catch on the under side of the bobbin area and bind up.

Good Luck !!!!!!!!!!!