Tweet
Yesterday, I powered up my machine and ran designs with no problem. I went out for part of the day, and when I came back I noticed the Amaya light wasn't on. My computer was still up and showed no signs of power outage.
I didn't test anything at that time, just made sure everything was shut off. This morning I went through my normal startup routine, but no power to the Amaya. I checked the exterior power supply and it's fine.
The next step as I understand it is to check/change the fuses. I've got the fuses open, but can't seem to get them out of the machine. Is there some trick to this?
Thanks,
Connie
I didn't test anything at that time, just made sure everything was shut off. This morning I went through my normal startup routine, but no power to the Amaya. I checked the exterior power supply and it's fine.
The next step as I understand it is to check/change the fuses. I've got the fuses open, but can't seem to get them out of the machine. Is there some trick to this?
Thanks,
Connie