Hi guys, I am posting then going to bed. FRUSTRATED!!! Ok, I am sewing on the front of a 6 panel structured Flexfit hat. Using a WAC red hat frame. have done hats with this before and no problem. This is a single color sew-out which started by shredding the upper thread. I checked my thread path, checked the bobbin, checked the needle orientation and tried again. more shredding. Changed needle, no shredding. BUT, now it sews 10 to 12 stitches and unthreads itself. I have spent the last 30 minutes to sew 4 little letters. I am probably overlooking something very simple, but go ahead and tell me. here are my settings
Thanks in advance for the help, see ya in the morning
Bambie
Machine is AMAYA XT.
Design shop Pro + 9
Hoop WACF red
Presser foot up two clicks
bobbin detection off
ACtifeed 9
speed all the way down to 700
Font block 2
density 4.0
stitch type satin
underlay fill
pull 100%
height 0.413
Thanks in advance for the help, see ya in the morning
Bambie
Machine is AMAYA XT.
Design shop Pro + 9
Hoop WACF red
Presser foot up two clicks
bobbin detection off
ACtifeed 9
speed all the way down to 700
Font block 2
density 4.0
stitch type satin
underlay fill
pull 100%
height 0.413
Comment