Quantcast troubleshouting while runing test design

news

discussion boards mailing list tips / tricks / forms designs suppliers find a shop marketplace
News
  archives

Discussion
  main menu

Suppliers
  apparel
 
hats
 
thread
  backing
  hoops / hooping
  stock designs

Tips & Tricks
  main menu

Mailing List
  sign up now
 
my account

Amaya Shops
  locate a shop

Marketplace
  shop for supplies

Resources
  official Melco site
  online resources

 

Help Support This Site:


 


 

Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2014
    Posts
    13
    Post Thanks / Like

    troubleshouting while runing test design

    b"h

    i did the "rose" test design and the machine stopped few times -thread brakes, pull outs,and loosen stitches.
    the aos opend a window and it was saying "y motor tracking error".
    is anyone femilier with this problam and the way to handel this without calling a tech that is not avaluable in our country.
    thanks
    chaya

  2. #2
    Join Date
    May 2006
    Location
    Arizona
    Posts
    465
    Post Thanks / Like
    I would stitch the i test. It is 16 bars that will give you an idea of the bobbin tightness. Also go to settings, thread feed and see what the numbers are set at. Default is thread feed 4 and lower limit is 2. If this is thick velvet raise the thread feed to 5 or 6 and the lower limit to 3.
    Wishes In Stitches Embroidery<br />4502 W. Buffalo Street<br />Chandler, Arizona 85226<br />480-216-3163

  3. Thanks chaya Thanked for this post
  4. #3
    Join Date
    May 2006
    Location
    Star, ID
    Posts
    1,551
    Post Thanks / Like
    For clarification.....the "Auto Lower Limit" only works if the machine is in the "Auto" mode The material feed is then regulated automatically by the computer. The "auto lower limit" allows you to tell the machine while in auto mode to "never" go below whatever number you place in the "auto lower limit " box Choosing to change the material feed number while in auto mode does nothing as far as the machine setting is concerned.

    If you place the machine in the "Standard" mode, then the auto lower limit is not functional anymore and then the material feed number does come into play. Whatever number you place in the material feed box becomes a constant and will stay there until you either choose to return to the auto mode or change the Standard material feed number.

    Addressing the other issue...the first thing that must be know would be a question of lubrication. The X carriage rails may need lubed as well as the Y rail guide blocks. The pinch rollers and the inner thread feed roller may be in need of some additional lubing as well. In general making "sure" that the entire machine is "well" lubricated.

    Bobbin tension??

    Presserfoot height?? Should be not more than 2 clicks up from all the way down.....

    X axis cable tension??? When was the last time it was checked?

    Rod Springer
    Amaya Tech & Trainer
    Certified tech & trainer<br />208-898-4117

  5. Thanks chaya Thanked for this post
  6. #4
    Join Date
    Apr 2014
    Posts
    13
    Post Thanks / Like
    Thank you everyone

    the presser foot actualy was up, I changed it , and I did the lubrication and the rotary wash

    I think it helped ... keep trying

    X axis cable tension was checked two months ago and it was too loosen . it was'nt possible to tighten it

    so my husband(my tech.. ) fixed it some how..

    Thank you again
    Chaya

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
  a Levelbest Network Site - 2013

This site is not owned by or affiliated with Melco or any companies or subsidiaries.